ERA Produced PVC-U PIPE AND FITTINGS FOR STORMWATER(AS NZS1254)

Product Description

Under the AS/NZS 1254 standard, the rainwater series fittings are primarily made of PVC-U (unplasticized polyvinyl chloride) and include pipes and fittings for underground or surface water drainage. The fittings come in various types, such as elbows, tees, couplings, clamps, reducers, and caps, catering to diverse drainage system requirements.

Standard Introduction

Scope：This standard specifies the requirements for PVC-U pipes and fittings used for conveying rainwater or surface water, including pipes and their corresponding fittings.

General requirements：These cover the composition, color, and appearance defects of pipe fittings. For instance, pipe fittings shall be free from obvious defects, elastic seals, solvent cements, etc., must comply with relevant regulations, and additional requirements are specified for packaging, storage, and transportation.

Performance Requirements：There are clear specifications for the performance testing of pipes and fittings, such as impact characteristics of pipes, bonding strength , pipe stiffness, etc.

Dimensional requirements：Specify the diameter, wall thickness, length, and other dimensional parameters of pipes and fittings in detail. Specific dimensions are determined based on different applications and design requirements.

Marking requirements：Piping and pipe fittings shall be clearly marked with information such as standard numbers, nominal diameters, and stiffness grades to facilitate identification and installation.

Product Ranges：